2019 Massey Ferguson 1844S

Call for Price


Availability
Brochure
Year
2019
Manufacturer
Massey Ferguson
Model
1844S

Overview

Description

Innovation
  • Fork it over: A new packer fork with revised spacing significantly increases feeder capacity in a wide range of crops and conditions
  • Pre-compression rocks!: Our pre-compression chamber starts building density before baling to reduce plunger load, lower HP requirements and increase baling capacity
  • Picked clean: Enhanced pick-up cross augers provide additional pick-up capacity, particularly in large windrows and uneven crops
  • Bigger bale chamber: Our OptiForm™ bale chamber for the 1840 has been extended by 18 in. to ensure consistent bale shape and density in all conditions.
Capablity
  • Delicious, nutritious: Since each bale flake is pre-formed before it goes into the bale chamber, the nutritious leaves are more evenly distributed throughout the bale
  • Take the plunge: Short plunger strokes in the 1800 Series reduces wear on the baler, prolonging component life and increasing reliability
  • Set it & forget it: A gauge lets you preset bale density to keep bale density and weight constant even as hay moisture conditions change through the day
  • In-line everywhere: Because field and road positions are one and the same, you save time when you’re on the move
Bale Size
  • Size of chamber in. (mm): 15 x 22 (380 x 560)
  • Bale length in. (mm): 12 to 52 (305 to 1,321)
Dimensions & Weight
  • Length w/bale chute in. (mm): 285 (7,239)
  • Width (overall) in. (mm): 104 (2,642)
  • Height w/shielding in. (mm): 69 (1,753)
  • Baler weight, approx. lbs. (kg.): 8,000 (3,632)
  • Tongue weight lbs. (kg.): 1,030 (468)
Tires
  • Flotation: 14L x 16.1, 12 Ply
  • Pickup gauge wheels: 4.00 x 16 pneumatic w/ inner tube
Pickup
  • Drive: Drive shaft and roller chain
  • Width - Tine to tine in. (mm): 70.2 (1,783)
  • Width - Inside panel to panel in. (mm): 77.5 (1,969)
  • Width - Outside panel to panel in. (mm): 91.2 (2,317)
  • Width - Overall w/gauge wheels in. (mm): 108.5 (2,756)
  • Number of tine bars: 4
  • Number and type of tines: 56, double tines
  • Tine spacing in. (mm): 2.6 (66)
  • Tine control: Dual camtracks
  • Protection: Slip & overrunning clutch
  • Augers - Length in. (mm): 33.5 (852)
  • Augers - Shaft size in. (mm): 1.38 (34.9)
  • Augers - Speed RPM: 278
  • Gauge wheels: 2 (one per side)
  • Pickup lift: Hydraulic cylinder
Feeding System
  • Stuffer: 6 tines
  • Protection: Shearbolt
Plunger
  • Speed: strokes / min.: 90
  • Length of stroke: in. (mm): 21.9 (556)
  • Mounting: 10 sealed ball bearing rollers
Tractor Requirements
  • Minimum PTO HP (kW): 80 (60)
Hydraulic System
  • Type: Self-contained
  • Pump displacement gpm (L/min): 3.6 (13.6)
Towing Vehicle Requirements
  • Weight, minimum lbs. (kg.): 5,700 (2,588)
  • Electrical: 12 V DC w/ ASAE 7-pin connector for warning lights

Specs

Dimensions

Length
w/o bale chute: 285 in. (7239 mm)
Width
104 in. (2642 mm)
Height
69 in. (1753 mm)
Weight
8000 lb. (3632 kg)

General

Bale Size
Size of Chamber: 15 x 22 in. (380 x 560 mm); Bale Length: 12 to 52 in. (305 to 1321 mm)

Related Products